PFPE Single-Phase Immersion Coolants
FluoRight SC Series PFPE Immersion Coolants
Low-viscosity dielectric coolants for data-center and electronics immersion cooling
FluoRight SC Series PFPE immersion coolants are engineered for single-phase immersion cooling of servers, data-center hardware and high-density electronics, with high dielectric strength, low vapor pressure and strong thermal stability.
Product Features
- 01Excellent thermal and chemical stability
- 02Low viscosity with effective heat-transfer performance
- 03Non-reactive with metals, plastics, elastomers and rubber
- 04High dielectric strength, low vapor pressure and no flash point
Typical Properties
| Property | SC-1 | SC-2 | SC-3 |
|---|---|---|---|
| Appearance and odor | Colorless, clear, odorless | Colorless, clear, odorless | Colorless, clear, odorless |
| Flash point / ignition / autoignition | None | None | None |
| Thermal decomposition temperature (°C) | 290 | 290 | 290 |
| Boiling point (°C) | 130 | 210 | 250 |
| Neutralization number (mg KOH·g⁻¹) | 0.03 | 0.03 | 0.03 |
| Kinematic viscosity, 40°C (mm²·s⁻¹) | 4 | 6 | 9 |
| Water content (%) | 0.005 | 0.005 | 0.005 |
| Density (g·cm⁻³) | 1.80 | 1.83 | 1.85 |
| Dielectric strength, 2.54 mm (kV) | 40 | 40 | 40 |
| Volume resistivity (Ω·cm) | 1×10¹⁵ | 1×10¹⁵ | 1×10¹⁵ |
| Dielectric constant, 10 kHz | 2 | 2 | 2 |
| Specific heat (J·kg⁻¹·K⁻¹) | 960 | 960 | 960 |
| Thermal conductivity (W·m⁻¹·K⁻¹) | 0.065 | 0.065 | 0.065 |
| Pour point (°C) | −80 | −69 | −65 |
Applications
- 01Single-phase immersion cooling for data-center servers
- 02High-density computing and storage equipment
- 03Power electronics and network infrastructure
- 04Closed electronics thermal-management systems
Storage & Transport
Store tightly sealed in a cool, dry and well-ventilated place. Protect from direct sunlight, high temperatures, heat sources and strong oxidizers. Reseal promptly after opening. Prevent impact, tipping, package damage, rain and excessive heat during handling and transport.
Product Safety
For industrial use only. Maintain adequate ventilation and avoid inhalation of high vapor concentrations or contact with skin and eyes. Wear suitable gloves and eye protection. Read and understand the current Safety Data Sheet (SDS) before use.
Notice
The information, data and recommendations on this page are based on the company's current laboratory results and technical experience and are for reference only. Actual results may vary with materials, equipment, process conditions and the use environment. Users should complete suitability and safety validation before formal use.
