Low-Boiling Hydrofluoroether Fluid
FluoRight 70
Fast-evaporating fluid for precision cleaning and advanced processes
FluoRight™ 70 is a low-boiling hydrofluoroether fluid designed for precision cleaning, process-solvent, heat-transfer and specialty industrial applications. Rapid evaporation, low surface tension and strong thermal and chemical stability support efficient processing across electronics, semiconductor, optical, automotive and aerospace operations.
Product Features
- 01Rapid evaporation supports efficient rinsing and fast, residue-minimized drying.
- 02Low surface tension improves penetration into fine gaps and complex assemblies.
- 03Non-flammable under the reported test conditions, with zero ozone depletion potential.
- 04Good thermal and chemical stability for demanding industrial processes.
- 05Compatible with a broad range of engineering materials when properly validated.
Typical Properties
| Item | Specification |
|---|---|
| Appearance | Colorless, transparent liquid |
| Purity | ≥99.5% |
| Non-volatile residue | <2.0 ppm |
| Boiling point | 34°C |
| Freezing point | −123°C |
| Critical temperature | 165°C |
| Critical pressure | 2.48 MPa |
| Vapor pressure | 65 kPa |
| Liquid density | 1.40 g/cm³ |
| Specific heat | 1300 J/(kg·°C) |
| Thermal conductivity | 0.07 W/(m·°C) |
| Water solubility | 60 ppmw |
| Dielectric strength (0.1 in gap) | >25 kV |
| Dielectric constant at 1 kHz | 7.4 |
| Volume resistivity | 10⁸ Ω·cm |
| Ozone depletion potential | 0 |
| Global warming potential | 420 |
| Atmospheric lifetime | 4.9 years |
| Flash point | None |
Identification
- 01Chemical formula: C3F7OCH3
- 02CAS number: 375-03-1
- 03Molecular weight: 200 g/mol
Applications
- 01Precision cleaning of electronic components, semiconductor parts, FOUPs, displays and optical components
- 02Cleaning of compatible automotive, aerospace, oxygen-service and medical-device components
- 03Process solvent for leak testing, coatings, screen printing, fluorinated oils, resins and extraction
- 04Heat-transfer fluid for dry etching, photolithography, ion implantation and information-processing equipment
- 05Carrier, foaming or drying medium in validated specialty processes
Storage
Store in the original tightly closed container in a dry, cool and well-ventilated place. Protect from direct sunlight and heat, and keep away from acids, alkalis and oxidizing agents. Minimize vapor release and follow the current SDS.
Product Safety
For industrial use only. Confirm substrate compatibility, process suitability and recovery conditions under actual operating parameters. Read and understand the current Safety Data Sheet (SDS) before use.
Alternative Selection Note
For users evaluating a 3M Novec 7000 alternative, FluoRight 70 can be assessed for fast-drying precision cleaning, process-solvent and heat-transfer applications. Final selection should be based on required physical properties, equipment design and process validation. Third-party product names are used only for product-selection reference; this is not a claim of drop-in equivalence.
Notice
The information, data and recommendations on this page are based on the company's current laboratory results and technical experience and are for reference only. Actual results may vary with substrate, equipment, process conditions and use environment. Users should conduct suitability testing before formal use. XIAOJU Chemical makes no guarantee for results arising from use beyond recommended conditions or without sufficient verification and shall not be liable for resulting direct or indirect losses.
